ASTM A516/516M / ASME SA516/516M GRADE 60/65/70 BOILER, PRESSURE VESSEL STEEL PLATE FOR MODERATE & LOWER TEMPERATURE SERVICE
Hot Rolled Steel Plates
ASME SA516/SA516M-07 MT LTV ZT Grade 60/65/70
ASTM A516/A516M-07 MT LTV ZT Grade 60/65/70
ASME Section II Part A Edition 2007 Addenda 2008
ASME SA20/SA20M-08
ASTM A20/A20M-08
ASME SA770/SA770M-04
ASTM E290-97a
NACE MR-0175 / ISO 15156
Low Sulphur 0.003% max. with Supplementary Requirements S1, S2, S3, S4, S5, S6, S7, S8, S9, S11, S12, S14, S17 acc. to ASME SA20/SA20M
Condition : Fully Killed, Normalized, Stress-Relieved (PWHT) Post Weld Heat Treatment
Steel Making Process : Open Hearth Furnace / Basic Oxygen Furnace (BOF), Ladle Refining Furnace (LRF), Vacuum Degassed (VD)
Vacuum Treated/Degassed, Fully Deoxidised to fine grain practice & Calcium Treated if Sulphur content is >0.001%, Desulphurised, Dephosphorised
Charpy V-notch Impact Tested
Size tolerance as per EN 10029:1991
Positive thickness tolerance as per EN 10029:1991 Table 1, Class A
Flatness Tolerance as per Table 4, Class N, Category L of EN 10029-1991
Surface Quality as per EN 10163:1991 Part 2, Class A, Subclass-3
Edges : Trimmed / Mill Edge
Ultrasonic as per ASTM A578/578M Level A / Level B
Grain size No.6-8 or finer acc. to ASTM E112-96
Mill certificate acc. to EN 10204 3.1 / EN 10204 3.2 with IBR Form IV
We mainly stock the Plates of following make :
Azovstal Iron & Steel - Ukraine
Alchevsk Iron & Steel - Ukraine
Ilyich Iron & Steel - Ukraine
ArcelorMittal Steel - Romania
Thainox Steel - Taiwan
Iscor - South Africa
Salzgitter Mannesmann - Germany
ThyssenKrupp Steel - Germany
ThyssenKrupp Stahl - Germany
Dillinger Hutte - Germany
Rautaruukki - Finland
Voestalphine Grobblech - Austria
Corus - U.K
Posco - Korea
InduSteel - France
InduSteel - Belgium
SSAB - Sweden
Sumitomo - Japan
Kobe Steel - Japan
JFE Steel - Japan
Japan Steel - Japan
Nippon Steel - Japan
Severstal - Russia
SAIL - India
Jindal Steel - India
TATA Steel - India
Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
| Contact Us |
Company Name : |
Unisteels & Engineering Co. (P) Ltd. |
Company Address : |
52/52A, Islampura Street, Near Alankar
Cinema,
Mumbai-400004, India |
Phone : |
91-22-2380 6452 / 6659 5316 / 6743 6950 |
Fax : |
91-22-2386 4507 |
Contact Person : |
Mr. Pukhraj Shah |
Mobile : |
0091-93240 49344 |
| |
info@unisteels.in |
|
|
