THREADED BAR / ROD
ASME SA 193 Grade B7, Grade B7M, Grade B16
ASTM A 193 Grade B7, Grade B7M, Grade B16
ASME SA 320 Grade L7, Grade L7M, Grade L43
ASTM A 320 Grade L7, Grade L7M, Grade L43
ASME SA 194 Grade 2H, Grade 2HM, Grade 3, Grade 4, Grade 7, Grade 7M, Grade 16
ASTM A 194 Grade 2H, 2HM, 3, 4, 7, 7M, 16
ASME SA 193 Grade B8, Grade B8M, Grade B8 Class 2, Grade B8M Class 2
ASTM A 193 Grade B8, B6M, B8 Class 2, B8M Class 2
ASME SA 320 Grade B8, Grade B8M, Grade B8 Class 2, Grade B8M Class 2
ASTM A 320 Grade B8, B8M, B8 Class 2, B8M Class 2
ASME SA 307 Grade A, B, C Carbon Steel Bolt and Stud 60000 PSI Tensile Strength
ASTM A 307 Grade A, B, C Carbon Steel Bolt and Stud 60,000 PSI Tensile Strength
ASME SA 194 Grade 8, Grade 8M, Grade 8F, Grade 8A, Grade 8C, Grade 6, Grade 310
ASTM A 194 Grade 8, 8M, 8F, 8A, 8C, 6, 310
Threaded Rod / Threaded Bar DIN 975, Stud Bolt DIN 976
Hexagon Bolt DIN 601, DIN 931, DIN 933, Hexagon Nut DIN 555, DIN 934
Plain Washer DIN 125, Stud Metal End DIN 938, DIN 939, DIN 940
Property Class : 4.8, 5.6, 5.8, 8.8, 10.9, 12.9
Coating : Bright Zinc Plated, Hot Dip Galvanised, Phosphatided, Nickel Plated
Material : 22CrMo4, 24CrMo4, 25CrMo4, 26CrMo4, 34CrMo4, 42CrMo4, 34CrNiMo6, 41CrNiMo6
Material : AISI 4130, SAE 4130, AISI 4140, SAE 4140, AISI 4145, SAE 4145, AISI 4340, SAE 4340
Material : EN 8, EN 9, EN 19, EN 24 Condition : Normalised, Tempered, Quenched & Tempered
HEAT-TREATED ALLOY STUDS, BOLTS THREADED BARS & RODS
Chemical Composition
| Elements |
A354 Grades BC, BD |
A193 Grade B7 |
| **See Note Below |
Chromium-Molybdenum |
| Range percent |
Check variation
over percent |
Range percent |
Check variation
over or under percent |
| Carbon... |
-- |
-- |
*0.38-0.48 |
0.02 |
| Manganese... |
-- |
-- |
0.750-1.00 |
0.04 |
| Phosphorus, max... |
0.04 |
0.005 |
0.04 |
0.005 over |
| Sulphur, max... |
0.04 |
0.005 |
0.04 |
0.005 over |
| Silicon... |
-- |
-- |
0.20-0.35 |
0.02 |
| Chromium... |
-- |
-- |
0.80-1.10 |
0.05 |
| Molybdenum... |
-- |
-- |
0.15-0.25 |
0.02 |
| Elements |
A193 Grade B16
Chromium-Molybdenum-Vanadium |
| Range percent |
Check variation
over or under percent |
| Carbon... |
0.36-0.44 |
0.02 |
| Manganese... |
0.45-0.70 |
0.03 |
| Phosphorus, max... |
0.04 |
0.005 over |
| Sulphur, max... |
0.04 |
0.005 over |
| Silicon... |
0.20-0.35 |
0.02 |
| Chromium... |
0.80-1.15 |
0.05 |
| Molybdenum... |
0.50-0.65 |
0.03 |
| Vanadium... |
0.25-0.35 |
0.03 |
| Elements |
A320 Grade L7 |
A320 Grade L43 |
Chromium-Molybdenum
(AISI 4140, 4142, 4145) |
Nickel-Chromium-Molybdenum
(AISI 4340) |
| Range percent |
Check variation
over percent |
Range percent |
Check variation
over or under percent |
| Carbon... |
*0.38-0.48 |
0.02 |
0.38-0.148 |
0.02 |
| Manganese... |
0.75-1.00 |
0.04 |
0.60-0.85 |
0.03 |
| Phosphorus, max... |
0.04 |
0.005 over |
0.04 |
0.005 over |
| Sulphur, max... |
0.04 |
0.005 over |
0.04 |
0.005 over |
| Silicon... |
0.20-0.35 |
0.02 |
0.20-0.35 |
0.02 |
| Nickel... |
-- |
-- |
1.65-2.00 |
0.05 |
| Chromium... |
0.80-1.10 |
0.05 |
0.70-1.90 |
0.03 |
| Molybdenum... |
0.15-0.25 |
0.02 |
0.20-0.30 |
0.02 |
*For bar sizes over 3-1/2 in. to 4 in., inclusive, the carbon content may be 0.50 pct. max.
** Any alloy steel capable of meeting the tensile requirements of Specification A354 may be used.
Tensile Requirements
| Grade |
Diameter, in. |
Min
tempering
temp F |
Tensile
strength
min psi |
Yield
point
min psi |
Elongation
in 2 in.
min pct |
Reduction
of area
min pct |
| A354 Grade BC |
{2-1/2 and under
{Over 2-1/2 to 4 incl. |
850 |
125,000 |
109,000 |
16 |
50 |
| A354 Grade BD |
1-1/2 and under |
850 |
115,000 |
99,000 |
16 |
45 |
A193 Grade B7
Chromium-
Molybdenum |
{2-1/2 and under
{Over 2-1/2 to 4 incl.
{Over 4 to 7 incl. |
850 |
150,000 |
125,000 |
14 |
35 |
A193 Grade B16
Chromium-
Molybdenum-
Vanadium |
{2-1/2 and under
{Over 2-1/2 to 4 incl.
{Over 4 to 7 incl. |
1100
1100
1100 |
125,000
115,000
100,000 |
105,000
95,000
75,000 |
16
16
18 |
50
50
50 |
A320 Grade L7
Chromium-
Molybdenum |
2-1/2 and under |
-- |
125,000 |
105,000 |
16 |
50 |
A320 Grade L43
Nickel-Chromium-
Molybdenum |
4 and under |
-- |
125,000 |
105,000 |
16 |
50 |
Commonly used are the following grades of heat-treated alloy steel for high-pressure or extreme temperature service in diameters of 1/2 in. to 2 in., inclusive. Other grades and other diameters are available on special order.
ASTM A354, Grades BC and BD - heat-treated alloy steels for applications at normal atmospheric temperatures where high strength is required.
ASTM A193, Grade B7 - a heat-treated chromium-molybdenum steel widely used for medium high-temperature service.
ASTM A193, Grade B16 - a heat-treated chromium-molybdenum-vanadium steel for high-pressure, high-temperature service.
ASTM A320, Grade L7 - This grade is intended for low-temperature service down to minus 150ºF and has a minimum Charpy impact value of 15 ft-lb at this temperature. Sizes 2-1/2 in. and under.
ASTM A320, Grade L43 - The same properties offered by Grade L7 in sizes up to 2-1/2 are obtainable up to 4 in. in Grade L43
ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS
Identification
Grade Mark |
Specification |
Fastener
Description |
Material |
Nominal Size
Range (in.) |
Mechanical Properties |
Proof Load
(psi) |
Yield Strength
Min (psi) |
Tensile Strength
Min (psi) |
No
Grade
Mark |
SAE J429
Grade 1 |
Bolts,
Screws,
Studs |
Low or Medium Carbon Steel |
1/4 thru 1-1/2 |
33,000 |
36,000 |
60,000 |
ASTM A307
Grades A&B |
Low Carbon Steel |
1/4 thru 4 |
-- |
-- |
SAE J429
Grade 2 |
Low or Medium Carbon Steel |
1/4 thru 3/4 Over 3/4 to 1-1/2 |
55,000
33,000 |
57,000
36,000 |
74,000
60,000 |
No
Grade
Mark |
SAE J429
Grade 4 |
Studs |
Medium Carbon Cold Drawn Steel |
1/4 thru 1-1/2 |
-- |
100,000 |
115,000 |
B5 |
ASTM A193
Grade B5 |
|
AISI 501 |
1/4 Thru 4 |
-- |
80,000 |
100,000 |
B6 |
ASTM A193
Grade B6 |
AISI 410 |
85,000 |
110,000 |
B7 |
ASTM A193
Grade B7 |
AISI 4140, 4142, OR 4105 |
1/4 thru 2-1/2
Over 2-1/2 thru 4
Over 4 thru 7 |
--
--
-- |
105,000
95,000
75,000 |
125,000
115,000
100,000 |
B16 |
ASTM A193
Grade B16 |
CrMoVa Alloy Steel |
105,000
95,000
85,000 |
125,000
115,000
100,000 |
B8 |
ASTM A193
Grade B8 |
AISI 304 |
1/4 and larger |
-- |
30,000 |
75,000 |
B8C |
ASTM A193
Grade B8C |
AISI 347 |
B8M |
ASTM A193
Grade B8M |
AISI 316 |
B8T |
ASTM A193
Grade B8T |
Bolts,
Screws,
Studs for High-Temperature Service |
AISI 321 |
1/4 and larger |
-- |
30,000 |
75,000 |
B8 |
ASTM A193
Grade B8 |
AISI 304
Strain Hardened |
1/4 thr 3/4
Over 3/4 thru 1
Over 1 thru 1-1/4
Over 1-1/4 thru 1-1/2 |
--
--
--
-- |
100,000
80,000
65,000
50,000 |
125,000
115,000
105,000
100,000 |
B8C |
ASTM A193
Grade B8C |
AISI 347
Strain Hardened |
B8M |
ASTM A193
Grade B8M |
AISI 316
Strain Hardened |
95,000
80,000
65,000
50,000 |
110,000
100,000
95,000
90,000 |
B8T |
ASTM A193
Grade B8T |
AISI 321
Strain Hardened |
100,000
80,000
65,000
50,000 |
125,000
115,000
105,000
100,000 |
L7 |
ASTM A320
Grade L7 |
Bolts,
Screws,
Studs for Low-Temperature Service |
AISI 4140,
4142 or 4145 |
1/4 thru 2-1/2 |
-- |
105,000 |
125,000 |
L7A |
ASTM A320
Grade L7A |
AISI 4037 |
L7B |
ASTM A320
Grade L7B |
AISI 4137 |
L7C |
ASTM A320
Grade LC7 |
AISI 8740 |
L43 |
ASTM A320
Grade L43 |
AISI 4340 |
1/4 thru 4 |
-- |
105,000 |
125,000 |
B8 |
ASTM A320
Grade B8 |
Bolts,
Screws,
Studs for Low-Temperature Service |
AISI 304 |
1/4 and larger |
-- |
30,000 |
75,000 |
B8C |
ASTM A320
Grade B8C |
AISI 347 |
B8T |
ASTM A320
Grade B8T |
AISI 321 |
B8F |
ASTM A320
Grade B8F |
AISI 303
or 303Se |
B8M |
ASTM A320
Grade B8M |
AISI 316 |
B8 |
ASTM A320
Grade B8 |
AISI 304 |
1/4 thru 3/4
Over 3/4 thru 1
Over 1 thru 1-1/4
Over 1-1/4 thru 1-1/2 |
--
--
--
-- |
100,000
80,000
65,00
50,00 |
100,000
80,000
65,00
50,00 |
B8C |
ASTM A320
Grade B8C |
AISI 347 |
B8F |
ASTM A320
Grade B8F |
AISI 303
or 303Se |
B8M |
ASTM A320
Grade B8M |
AISI 316 |
B8T |
ASTM A320
Grade B8T |
AISI 321 |
 |
SAE J429
Grade 5 |
Bolts,
Screws,
Studs |
Medium Carbon Steel, Quenched and Tempered |
1/4 thru 1
Over 1 to 1-1/2 |
85,000
74,000 |
92,000
81,000 |
120,000
105,000 |
| ASTM A449 |
1/4 thru 1
Over 1 to 1-1/2
Over 1-1/2 thru 3 |
85,000
74,000
55,000 |
92,000
81,000
58,000 |
120,000
105,000
90,000 |
 |
SAE J429
Grade 5.1 |
Sems |
Low or Medium Carbon Steel, Quenched and Tempered |
No. 6
thru 3/8 |
85,000 |
-- |
120,000 |
 |
SAE J429
Grade 5.2 |
Bolts,
Screws,
Studs |
Low Carbon Martensitic Steel, Quenched and Tempered |
1/4 thru 1 |
85,000 |
92,000 |
120,000 |
A325 |
ASTM A325
Type 1 |
High Strength
Structural Bolts |
Medium Carbon Steel, Quenched and Tempered |
1/2 thru 1
1-1/8 thru 1-1/2 |
85,000
74,000 |
92,000
81,000 |
120,000
105,000 |
A325 |
ASTM A325
Type 2 |
Low Carbon Martensitic Steel, Quenched and Tempered |
1/2 thru 1 |
85,000 |
92,000 |
120,000 |
A325 |
ASTM A325
Type 3 |
Atmospheric Corrosion Resisting Steel, Quenched and Tempered |
1/2 thru 1
1-1/8 thru 1-1/2 |
85,000
74,000 |
92,000
81,000 |
120,000
105,000 |
BB |
ASTM A354
Grade BB |
Bolts,
Studs |
Alloy Steel, Quenched and Tempered |
1/4 thru 2-1/2
2-3/4 thru 4 |
80,000
75,000 |
83,000
78,000 |
105,000
100,000 |
BC |
ASTM A354
Grade BC |
105,000
95,000 |
109,000
99,000 |
125,000
115,000 |
 |
SAE J429
Grade 7 |
Bolts,
Screws, |
Medium Carbon Alloy Steel, Quenched and Tempered 4 |
1/4 thru 1-1/2 |
105,000 |
115,000 |
133,000 |
 |
SAE J429
Grade 8 |
Bolts,
Screws,
Studs |
Medium Carbon Alloy Steel, Quenched and Tempered |
1/4 thru 1-1/2 |
120,000 |
130,000 |
150,000 |
ASTM A354
Grade BD |
Alloy Steel, Quenched and Tempered 4 |
No Grade
Mark |
SAE J429
Grade 8.1 |
Studs |
Medium Carbon Alloy or SAE 1041 Modified Elevated Temperature Drawn Steel |
1/4 thru 1-1/2 |
120,000 |
130,000 |
150,000 |
A490 |
ASTM A490 |
High Strength Structural Bolts |
Alloy Steel, Quenched and Tempered |
1/2 thru 1-1/2 |
120,000 |
130,000 |
150,000 min
170,000 max |
No Grade
Mark |
ISO R898
Class 4.6 |
Bolts,
Screws,
Studs |
Medium Carbon Steel, Quenched and Tempered |
All Sizes
thru 1-1/2 |
33,000 |
36,000 |
60,000 |
No Grade
Mark |
ISO R898
Class 5.8 |
55,000 |
57,000 |
74,000 |
8.8
or
88 |
ISO R898
Class 8.8 |
Alloy Steel, Quenched and Tempered |
85,000 |
92,000 |
120,000 |
10.9
or
109 |
ISO R898
Class 10.9 |
120,000 |
130,000 |
150,000 |
FASTENER IDENTIFICATION MARKING
Grade
Identification
Marking |
Specification |
Material |
Nominal Size
In. |
Proof
Load
Stress
ksi |
Hardness
Rockwell |
See
Note |
| Min |
Max |
No Mark |
ASTM A563 - Grade 0 |
Carbon Steel |
1/4 thru 1-1/2 |
69 |
B55 |
C32 |
3,4 |
| ASTM A563 - Grade A |
Carbon Steel |
1/4 thru 1-1/2 |
90 |
B68 |
C32 |
3,4 |
| ASTM A563 - Grade B |
Carbon Steel |
1/4 thru 1 |
120 |
B69 |
C32 |
3,4 |
| over 1 thru 1-1/2 |
105 |
 |
ASTM A563 - Grade C |
Carbon Steel
May be Quenched
and Tampered |
1/4 thru 4 |
144 |
B78 |
C38 |
5 |
 |
ASTM A563 - Grade C3 |
Atmospheric
Corrosion
Resistant Steel
May be Quenched
and Tampered |
1/4 thru 4 |
144 |
B78 |
C38 |
5,9 |
 |
ASTM A563 - Grade D |
Carbon Steel
May be Quenched
and Tampered |
1/4 thru 4 |
150 |
B84 |
C38 |
6 |
 |
ASTM A563 - Grade DH |
Carbon Steel
Quenched
and Tampered |
1/4 thru 4 |
175 |
C24 |
C38 |
6 |
 |
ASTM A563 - Grade DH3 |
Atmospheric
Corrosion
Resistant Steel,
Quenched
and Tampered |
1/4 thru 4 |
175 |
C24 |
C38 |
5,9 |
 |
ASTM A194 - Grade 1 |
Carbon Steel |
1/4 thru 4 |
130 |
B70 |
-- |
7 |
 |
ASTM A194 - Grade 2 |
Medium Carbon
Steel |
1/4 thru 4 |
150 |
159 |
352 |
7,8 |
 |
ASTM A194 - Grade 2H |
Medium Carbon
Steel, Quenched
and Tempered |
1/4 thru 4 |
175 |
C24 |
C38 |
7 |
 |
ASTM A194 - Grade 2HM |
Medium Carbon
Steel, Quenched
and Tempered |
1/4 thru 4 |
150 |
159 |
237 |
7,8 |
 |
ASTM A194 - Grade 4 |
Medium Carbon
Alloy Steel,
Quenched
and Tempered |
1/4 thru 4 |
175 |
C24 |
C38 |
7 |
 |
ASTM A194 - Grade 7 |
Medium Carbon
Alloy Steel,
Quenched
and Tempered |
1/4 thru 4 |
175 |
C24 |
C38 |
7 |
 |
ASTM A194 - Grade 7M |
Medium Carbon
Alloy Steel,
Quenched
and Tempered |
1/4 thru 4 |
150 |
159 |
237 |
7 |
| See Note 1,2 |
10 |
|
|
|
|
|
|
NOTES:
- In addition to the indicated grade marking, all grades, except A563 grades O, A and B, must be marked for manufacturer identification.
- The markings shown for all grades of A194 nuts are for cold formed and hot forged nuts. When nuts are machined from bar stock the nut must be additionally marked with the letter 'B'.
- Nuts are not required to be marked unless specified by the purchaser. When marked, the identification marking shall be the grade letter O, A or B.
- Properties shown are those of nonplated or noncoated coarse thread hex nuts.
- Properties shown are those of coarse thread heavy hex nuts.
- Properties shown are those of coarse thread heavy hex nuts.
- Properties shown are those of coarse 8-pitch thread heavy hex nuts.
- Hardnesses are Brinell Hardness Numbers.
- The nut manufacturer, at his option, may add other markings to indicate the use of atmospheric corrosion resistant steel.
- Specifications --
ASTM A563 -- Carbon and Alloy Steel Nuts.
ASTM A194/A194M -- Carbon and Alloy Steel Nuts for Bolts for High Pressure and High Temperature Service
Mechanical Requirements for Stainless Steel Fasteners
| Grade(1) |
General
Descpription
of Material |
Bolts, Screws and Studs |
Nuts |
Full Size Bolts,
Screws, Studs |
Machine Test Sprecimens of
Bolts, Screws, Studs |
Hardness
Rockwell |
Proof
Load
Stress |
Hardness
Rockwell |
Yield (2)
Strength |
Tensile
Strength |
Yield (2)
Strength |
Tensile
Strength |
Elong-
ation(3) |
| Min psi |
Min psi |
Min psi |
Min psi |
% Min. |
Min |
psi |
Min |
| 303A |
Austenitic
Stainless Steel-
Sol. Annealed |
30,000 |
75,000 |
30,000 |
75,000 |
20 |
B75 |
75,000 |
B75 |
| 304-A |
Austenitic
Stainless Steel-
Sol. Annealed |
30,000 |
75,000 |
30,000 |
75,000 |
20 |
B75 |
75,000 |
B75 |
| 304 |
Austenitic
Stainless Steel-
Cold Worked |
50,000 |
90,000 |
45,000 |
85,000 |
20 |
B85 |
90,000 |
B85 |
| 304-SH |
Austenitic
Stainless Steel-
Strain Hardened |
See
Note 6 |
See
Note 6 |
See
Note 6 |
See
Note 6 |
15 |
C25 |
See
Note 6 |
C20 |
| 305-A |
Austenitic
Stainless Steel-
Sol. Annealed |
30,000 |
75,000 |
30,000 |
75,000 |
20 |
B70 |
75,000 |
B70 |
| 305 |
Austenitic
Stainless Steel-
Cold Worked |
50,000 |
90,000 |
45,000 |
85,000 |
20 |
B85 |
90,000 |
B85 |
| 305-SH |
Austenitic
Stainless Steel-
Strain Hardened |
See
Note 6 |
See
Note 6 |
See
Note 6 |
See
Note 6 |
15 |
C25 |
See
Note 6 |
C20 |
| 316-A |
Austenitic
Stainless Steel-
Sol. Annealed |
30,000 |
75,000 |
30,000 |
75,000 |
20 |
B70 |
75,000 |
B70 |
| 316 |
Austenitic
Stainless Steel-
Cold Worked |
50,000 |
90,000 |
45,000 |
85,000 |
20 |
B85 |
90,000 |
B85 |
| 316-SH |
Austenitic
Stainless Steel-
Strain Hardened |
See
Note 6 |
See
Note 6 |
See
Note 6 |
See
Note 6 |
15 |
C25 |
See
Note 6 |
C20 |
| XM7-A |
Austenitic
Stainless Steel-
Sol. Annealed |
30,000 |
75,000 |
30,000 |
75,000 |
20 |
B70 |
75,000 |
B70 |
| XM7 |
Austenitic
Stainless Steel-
Cold Worked |
50,000 |
90,000 |
45,000 |
85,000 |
20 |
B85 |
90,000 |
B85 |
| 384-A |
Austenitic
Stainless Steel-
Sol. Annealed |
30,000 |
75,000 |
30,000 |
75,000 |
20 |
B70 |
75,000 |
B70 |
| 384 |
Austenitic
Stainless Steel-
Cold Worked |
50,000 |
90,000 |
45,000 |
85,000 |
20 |
B85 |
90,000 |
B85 |
| 410-H |
Martensitic
Stainless Steel-
Hardened and
Tempered |
95,000 |
125,000 |
95,000 |
125,000 |
20 |
C22 |
125,000 |
C22 |
| 410-HT |
Martensitic
Stainless Steel-
Hardened and
Tempered |
135,000 |
180,000 |
135,000 |
180,000 |
12 |
C36 |
180,000 |
C36 |
| 416-H |
Martensitic
Stainless Steel-
Hardened and
Tempered |
95,000 |
125,000 |
95,000 |
125,000 |
20 |
C22 |
125,000 |
C22 |
| 416-HT |
Martensitic
Stainless Steel-
Hardened and
Tempered |
135,000 |
180,000 |
135,000 |
180,000 |
12 |
C36 |
180,000 |
C36 |
| 430 |
Ferritic
Stainless Steel |
40,000 |
70,000 |
40,000 |
70,000 |
20 |
B75 |
70,000 |
B75 |
Note 6. Austenitic stainless steel, strain hardened bolts, screws, studs, and nuts shall have the following strength per properties.
Product
Size |
Bolts, Screws, Studs |
Nuts |
| Tested Full Size |
Machine Test Specimens, |
Proof
Load
Stress |
Yield
Strength |
Tensile
Strength |
Yield
Strength |
Tensile
Strength |
| in. |
min psi |
min psi |
min psi |
min psi |
psi |
| to 5/8 in. |
100,000 |
125,000 |
90,000 |
115,000 |
125,000 |
| over 5/8 to 1 in. |
70,000 |
105,000 |
65,000 |
100,000 |
105,000 |
| over 1 to 1-1/2 in. |
50,000 |
90,000 |
45,000 |
85,000 |
90,000 |
Certificate & Inspection : c/w Calibration Works Certificate EN10204 3.1/DIN 50049 3.1/ISO10474 3.1 Mill Test Report, NACE MR-01-03/NACE MR-01-75/ISO-15156, CE Marked, European Pressure Equipment Directive PED 97/23/EC, AD 2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part-A Edition 2008, API 6A, with 3.2 certificate duly certified & approved by LRS-Lloyd's Register, GL-Germanischer Lloyd, BV-Bureau Veritas, DNV-Det Norske Veritas, ABS-American Bureau of Shipping, SGS, TUV, RINA, IRS, NORSOK APPROVED STANDARD M630, M650 Rev.3
If you have any requirement of above items, please feel free to contact us
| Contact Us |
Company Name : |
Unisteels & Engineering Co. (P) Ltd. |
Company Address : |
52/52A, Islampura Street, Near Alankar Cinema,
Mumbai-400004, India |
Phone : |
91-22-2380 6452 / 5639 4950 / 2381 7341 |
Fax : |
91-22-2386 4507 |
Contact Person : |
Mr. Pukhraj Shah |
Mobile : |
0091-93240 49344 |
|
|
